Novec 1230 - English
JAMO-tek AS is supplying type-approved Novec systems. We have long experience in the design and delivery of Novec 1230 total flooding systems.
Typical rooms protected with Novec 1230:
Engine room, Auxilliary engine room, Pump room, Control room, Switchboard room and Emergency generator room. Our systems are type approved by DNV (MED) and LR.
The system is to be activated by manually operated pneumatic release cabinets with automatic time delay unit. The containers are mounted inside protected space and have a discharge time of less than 10 seconds.
Server rooms, computer rooms, switchboard and transformer rooms.
These systems will be activated automatically and manually (electically).
The containers are supplied with 3M ™ Novec ™ 1230 fluid. This fluid has a global heat potential (GWP factor) of 1, does not damage the ozone layer and has an atmospheric life of only 5 days. The minimum extinguishing concentration is far below the allowed limit (NOAEL), short discharge time, containers take up little place and have a storage pressure of only 25 bar, this is a very good alternative to other gas extinguishing systems.
CO2 system for galley duct:
On ships with galley ducts passing accommodation on the way out in the open air, the duct having a CO2 extinguishing system covering the duct from the damper for grease filter and out to the open deck. Ends channel to a muster station shall the duct regardless be protected with CO2 system. We supply CO2 cylinder cabinets with switches for automatic stop of ventilation, starting siren and automatic closing of dampers for grease filter. The system is manual operated.
Wet chemical systems:
We supply Wet chemical system for the protection of deep-fat fryers. The system is operated automatic and is operated manually from outside the galley and inside galley.
We supply Argonite systems as an alternative to CO2 systems to the maritime market. These systems are installed in a separate Argonite room in connection with the open deck.
The system is operated manually by pneumatic release cabinets with automatic time delay unit.
CO2 systems for machinery spaces and
cargo Class A:
We supply DNV type approved high pressure CO2 systems for ships through a supplier in Asia. We design systems and submit all documentation to the Authorities for approval. The equipment will be manufactured at factory in Asia and will be certified by class before shipping to us.
Water mist systems:
We are cooperating with TUROteknikk which supply water mist systems and foam systems to the maritime market. We deliver complete packages to the marine market together with TUROteknikk .